View this email in your browser

April 2017
PRODUCT LAUNCH MEDIA COVERAGE GLOBAL SNIPPETS

NEW PRODUCT INFORMATION

(All Dimensions in mm)
TVS KING
BLOCK KIT (01033GPL)

Features

  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life.
  • Graphite coated for better running
BAJAJ DISCOVER 125CC DTSi
BLOCK KIT (01815GMP)
PARAMETER SPEC
Diameter 54
No of Rings 3
No of cylinder set 1

Features

  • As Cast crown
  • Thin ring grooves for better sealing of gases & oil scrapping
  • Tapered Pin-boss to reduce weight thus better mileage
  • Oil holes in oil ring groove for lesser oil consumption
  • Skirt Moly Coated for better bedding in
  • Top and Oil steel ring
  • Second taper faced
MAHINDRA DURO / RODEO / FLYTE
BLOCK KIT (01038GP)
PARAMETER SPEC
Diameter 52.4
No of Rings 3
No of cylinder set 1

Features

  • As Cast crown
  • Thin ring grooves for better sealing of gases & oil scrapping
  • Oil holes in oil ring groove for lesser oil consumption
  • Box type Slipper design for low weight & better mileage
  • Tapered Pin-boss and less weight
  • Top and Oil steel ring
  • Second taper faced
TATA CUMMINS 6BT EIII
RING SET (5328SHAKTI)
PARAMETER SPEC
Diameter 102
No of Rings 3
No of cylinder set 6
GROOVE RING TYPE SPECIAL FEATURES
1st
Trapeze. Chrome Barrel honed
Axial Height: 3.00 mm
End Gap: 0.2 - 0.4mm
  • Chrome Coated with phosphating, ensures minimal wear & provides excellent scuff resistance.
  • KV1-high strength material for greater break & wear resistance.
  • Lower sharp edge, barrel Honed ring for low Lube oil consumption .
2nd
Axial Height: 2.39 mm
End Gap: 0.30-0.45 mm
  • Taper faced for lower oil consumption.
3rd
Axial Height: 4.00 mm
End Gap: 0.15 – 0.40mm
  • Profile ground contact land for higher radial pressure & better oil scraping effect.
  • Chrome coated lands provide higher wear resistance & excellent scuff resistance.
FT 60/70 AVL
MAIN BEARING
CONTENT Flange bearing Lower / Upper Main bearing Lower / Upper
PCS / SET 1 each 3 each
MATERIAL Copper – tin – lead (H24) Copper – tin – lead (H24)
SHAFT DIA 85.644 85.644
HOUSING DIA 92.065 92.065
WALL 3.165 3.165
LENGTH 32.84 25.2

Features

  • High resistance to overlay wear and fatigue.
  • Very good load bearing capacity
  • Good corrosion resistance
  • Nickel plated for better embedding capability
FT 60/70 AVL
CON ROD BEARING
CONTENT CR Bearing
PCS / SET 6
MATERIAL Copper – tin – lead (H24)
SHAFT DIA -
HOUSING DIA 73.815
WALL 1.963
LENGTH 30.2

Features

  • High resistance to overlay wear and fatigue.
  • Very good load bearing capacity
  • Good corrosion resistance
  • Nickel plated for better embedding capability

MEDIA COVERAGE

ACMA Automechanika 2017, New Delhi

The 3rd edition of India’s premium automotive aftermarket trade fair - ACMA Automechanika New Delhi, kick-started on 21st March with more than 550 exhibitors from 17 countries showcasing the latest in aftermarket, spread across 19,500 sqm.

This biennial event was a great opportunity for wholesalers, distributors, traders and component manufacturers to showcase their innovations besides getting access to global technology for future synergies and partnerships. Show was on from 21 Mar-24 Mar. Federal-Mogul Motorparts had its presence in the Safety pavilion, Hall no. 11. This Safe Drive pavilion was designed to undertake several measures to promote Road Safety and reduce road accidents through introduction of intelligent transport system, improved road engineering, safety regulations and on use of genuine parts to prevent road accidents.

A Seminar was also organised by ACMA for initial two days focusing on applicability of digitization for network partners. After which a panel discussion was organised by eminent personalities of the Auto motive industry on digital economy in Aftermarket. It was very well appreciated by all channel partners and industry attendees!!

Branded Vans Pan India Promotion

Champion and Ferodo Van

The van is branded as per the brand standards in a very classy look. One side it represents Champion brand and opposite side Ferodo brand. It is loaded with LED screen, which is utilised to show various brand related videos. It has panels in the backside on which products are displayed during demos and interaction with mechanics & other channel partners.

The videos played on the screen help team members get individual attention and to explain vision, mission & technology uphold of Federal-Mogul Motorparts. It is a great platform to give touch & feel of the product while explaining the product to mechanics. Not only this, the Champion/ Ferodo van also helps to cover maximum people in the visited location. From February to Apr, 2017 it has covered all part of Delhi, Eastern & Western UP including major towns like Ghaziabad, Agra, Meerut, Lucknow, Varanasi, Allahabad, Kanpur and surroundings.

Next month the van is scheduled to visit Himanchal Pradesh, Chandigarh, Ambala & Punjab. The van is surely a head turner. The response from market about this Van is amazing. The mechanics are really excited to see this brand van, recall value is also high!!

Goetze Van

It started in March, 2016. It was initially used to cover majorly North including Delhi, Meerut, Ghaziabad, Rohtak, Hissar and Central including Chattisgarh (Durg, Raipur, Bhilai); MP (Satna, Gwalior, Riva, Bhopal); Rajasthan (Jaipur, Bharatpur, Bhilwara, Udaipur, Ajmer). The van is fully loaded with brand representation focusing on GOETZE Engine Expertise. It has LED display and cabinets on both the sides and back portion for product display.

Engine specific & F-M Motorparts videos are run during mass interaction. Product touch & feel is given to mechanics & channel partners for better association and product recall. It is branded in pure Goetze brand colors. During March & April, 2017 the van was sent to Andhra Pradesh. It is covering Hyderabad, telangana & surroundings there. In May & June the van is further expected to cover Bangalore & surroundings.

GLOBAL SNIPPETS

Federal-Mogul Powertrain Debuts New Pokal Industrial Spark Plug

Federal-Mogul Powertrain has introduced a new industrial spark plug with high mechanical and electrical strength. The Pokal spark plug offers increased robustness for use in new engine applications with high peak cylinder pressures while also enabling the use of larger electrodes, providing increased service life and enhanced performance. The unique shape of the insulator core nose increases its resistance to mechanical pressure waves, allowing OEMs to use more aggressive combustion strategies for improved engine efficiency without reducing spark plug life.

Conventional insulators have a conical nose, the shape of which defines the heat range of the plug and ultimately limits the thermal extraction and electrical properties. The nose of the Pokal spark plug incorporates a cup-shaped cavity around the center electrode, improving both the electrical and mechanical strength. This shape allows the plug to better withstand increased voltage demand requirements, in addition to a more aggressive combustion setting.

The Pokal spark plug has been released for use in engines rated between 100 KW and 600 KW and has been in production since 2016. This technology is of interest worldwide for marine, off-highway and stationary industrial engines using gaseous fuels, including natural gas, landfill gas and bio-gas.

Champion was the first to pioneer ignition products for heavy-duty and industrial applications and, for over 100 years, is still driving the market in product excellence. The company’s products and services enable improved fuel economy, reduced emissions and enhanced vehicle safety.

Federal-Mogul operates two independent business divisions, each with a chief executive officer reporting to Federal-Mogul's Board of Directors. Federal-Mogul Powertrain designs and manufactures original equipment powertrain components and systems protection products for automotive, heavy-duty, industrial and transport applications. Federal-Mogul Motorparts sells and distributes a broad portfolio of products through more than 20 of the world’s most recognized brands in the global vehicle aftermarket, while also serving original equipment vehicle manufacturers with products including braking, wipers and a range of chassis components. Federal-Mogul was founded in Detroit in 1899 and maintains its worldwide headquarters in Southfield, Michigan. The Company has nearly 53,000 employees in 24 countries. For more information, please visit www.federalmogul.com.

View our loyalty programs - www.fmmp.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

FEDERAL MOGUL MOTORPARTS
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786701
customercare.india@federalmogul.com